KazeMaster display not working

[siggy_freud]

Just bought and installed my Kaze Master today. Worked great for a few hours. The fan controllers still work fine so far, but the display is completely gone. Is this faulty or is there something I am missing? The display was working great earlier but now, completely blank.


Thanks for the help!


Dylan.

[sumo]

Hi,

please have a look at the power connection of the panel a check if all lines are working fine. Mostly this is the reason why the display stops to work.


Cheers chris

[siggy_freud]

Thanks for the reply Chris,

I'll take a look at it when I get home. But from what I can remember, there is only 1 power connection that supplies the unit, so wouldn't it make sense that if the display wasn't working due to the power connection, the fan control would cease to work as well?

Currently the fan dials work well, but the display doesn't. Unless the resistence control to my fans works independently of the provided power.

[sumo]

Your powet connector has 4 pins. 12V / GND - 5V / GND, the 12V lane is for the fan controlling, the 5V lane for the display. And sometimes this 5V lane is not connect well.