Media Identification for Floppy-Card Reader Combo (YD-8V08) - Page 2

dframeli · #11 (**permalink**) 03-10-2008, 11:36 PM

Andy,

I'm running Vista x64. I tried installing the "Media Identification for Floppy-Card Reader Combo (YD-8V08)" utility, but it seemed to have no affect. (My media card icons appear just as they did prior to my installing the utility)

Is this utility x64 compatible?

If not, is there any chance we could get an x64 compatible version built?

Please advise.

Thanks,
Dale

Shinigami · #12 (**permalink**) 03-19-2008, 02:50 PM

HI,

It should work, strange. Can you please try to download the one below?
YE-Data Vista 32/64bit Driver

dframeli · #13 (**permalink**) 03-24-2008, 01:01 PM

If I install the media identification utility prior to installing my nVidia chipset/motherboard and display drivers, it works. Thanks a Million!

Hothnogg · #14 (**permalink**) 04-14-2008, 12:59 AM

is there a program that i can run for all the drives to show up in vista 64, coz ones been listed just show my drive as A only. Unlike the last poster i dont want to be starting from scratch uninstaling everything just to get the combo drives to work.

Shinigami · #15 (**permalink**) 04-15-2008, 01:17 PM

Well, we it basically should work. It might be a conflict with something. State your system information please. We will try again on our side again.

Cheers

kritika · #16 (**permalink**) 05-05-2008, 05:42 PM

Quote:

Originally Posted by dframeli

Andy,

I'm running Vista x64. I tried installing the "Media Identification for Floppy-Card Reader Combo (YD-8V08)" utility, but it seemed to have no affect. (My media card icons appear just as they did prior to my installing the utility)

Is this utility x64 compatible?

If not, is there any chance we could get an x64 compatible version built?

Please advise.

Thanks,
Dale

geez, it turns out that i have the same problem.

Shinigami · #17 (**permalink**) 05-06-2008, 12:04 PM

Hey!

I just tested it and it works perfectly on the Vista 64bit over here. See attached image.

Screenshot for your Info

ziomo · #18 (**permalink**) 07-28-2008, 10:45 AM

Is it possible to change icons in Vista?

pLUSpISTOL · #19 (**permalink**) 03-28-2009, 04:45 PM

Quote:

Originally Posted by Shinigami

Hey!

I just tested it and it works perfectly on the Vista 64bit over here. See attached image.

Screenshot for your Info

In your screenshot there is no Floppy drive present.
I have Vista 64bit installed, the card readers work but the floppy drive doesn't.
I have connected the FDD cable to my motherboard the correct way around and used the BIOS to select 1.44 floppy drive but when I boot my PC it freezes at "Detecting IDE drives".
The LED works for the card readers but when inserting a floppy it doesn't.

Please can you help me?

hiroshige · #20 (**permalink**) 03-30-2009, 02:02 PM

Hello pLUSpISTOL,

that's really strange. Could you please try to exchange the Cables first (Floppy-Cable + Power-Cable) to make sure, that this is not a issue of the cables but maybe of the device?

Cheers,
Stefan - Scythe EU Hamburg

#17 (permalink) 05-06-2008, 12:04 PM
Shinigami Product Manager Join Date: Apr 2007 Location: Hamburg Posts: 959	Hey! I just tested it and it works perfectly on the Vista 64bit over here. See attached image. Screenshot for your Info __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers
	Last edited by Shinigami; 05-06-2008 at 12:14 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#11 (permalink) 03-10-2008, 11:36 PM
dframeli Junior Member Join Date: Mar 2008 Posts: 2	Andy, I'm running Vista x64. I tried installing the "Media Identification for Floppy-Card Reader Combo (YD-8V08)" utility, but it seemed to have no affect. (My media card icons appear just as they did prior to my installing the utility) Is this utility x64 compatible? If not, is there any chance we could get an x64 compatible version built? Please advise. Thanks, Dale
	Last edited by dframeli; 03-12-2008 at 02:15 PM..

#12 (permalink) 03-19-2008, 02:50 PM
Shinigami Product Manager Join Date: Apr 2007 Location: Hamburg Posts: 959	HI, It should work, strange. Can you please try to download the one below? YE-Data Vista 32/64bit Driver __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#13 (permalink) 03-24-2008, 01:01 PM
dframeli Junior Member Join Date: Mar 2008 Posts: 2	Success :) If I install the media identification utility prior to installing my nVidia chipset/motherboard and display drivers, it works. Thanks a Million!

#14 (permalink) 04-14-2008, 12:59 AM
Hothnogg Junior Member Join Date: Apr 2008 Posts: 1	is there a program that i can run for all the drives to show up in vista 64, coz ones been listed just show my drive as A only. Unlike the last poster i dont want to be starting from scratch uninstaling everything just to get the combo drives to work.

#15 (permalink) 04-15-2008, 01:17 PM
Shinigami Product Manager Join Date: Apr 2007 Location: Hamburg Posts: 959	Well, we it basically should work. It might be a conflict with something. State your system information please. We will try again on our side again. Cheers __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#18 (permalink) 07-28-2008, 10:45 AM
ziomo Junior Member Join Date: Jul 2008 Posts: 1	Icons Is it possible to change icons in Vista?

#20 (permalink) 03-30-2009, 02:02 PM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hello pLUSpISTOL, that's really strange. Could you please try to exchange the Cables first (Floppy-Cable + Power-Cable) to make sure, that this is not a issue of the cables but maybe of the device? Cheers, Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!