View Single Post
  #8 (permalink)  
Old 03-23-2010, 04:34 PM
coldchef21 coldchef21 is offline
Junior Member
 
Join Date: Mar 2010
Posts: 6
Default

Quote:
Originally Posted by Oli View Post
Good luck and please report your temps when the installation is done.
Ok man, Im finally done with my build and just installed windows 7 64bit.

I had some serious trouble installing the cooler, the other clip thingy just didnt go all the way deep, was really hard putting cause the cooler was so high. anyway, it felt like it was good enough there, hopefully it doesnt drop

ok so i tried the Everest application(trial) and ran the one from tools -> stabiltity test( or something like that) i didnt reallyknow wich one was like a real benchmarking. anyway i only checked the "stress CPU" and clicked start

and i checked the temperatures and on idle i get every core is 28 celsius and on the load i ran the test about 2 mins and the temperature stopped heating at 44. I dont really know did i do anything right :P

Those are the results i got, if theres better way to do it, ill try em out. thanks

Last edited by coldchef21; 03-23-2010 at 04:37 PM.
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55