Hi
I just bought a shuriken rev.B and fitted it to my zotac 9300 itx motherboard with the heat pipes pointing towards the side of the motherboard (it wont fit the other way as the clips touch the chipset heatsink) but it won't fit in my Inwin BM648 Case this way round as the heatpipes foul the case fan.
As you can see in the picture below two heatpipes are outside the fan and the third goes right into it, stopping it. As this is the only fan in the case I really need it running.
Is it possible to get the revision A clips which are narrower so i can mount the shuriken with the heatpipes pointing towards the ram, as the shuriken should fit in next to the case fan this way.
Any help you can provide will be greatly appreciated.