New to this Forum so Hi everybody.
Q: OK They use wicking, no problems with mountin.
Next what about the choise of gas/liquid and pressure?
I have a Big Shurikan and changed to Nactua NF-P12 fan to increase cooling.
Many tests I've read results in this cpu cooler is good for cooling up to 80W? But they consider 65C on CPU is high enough? The i7 940 I have is good for 100C before triping.
I tested with OCCT to CPU 100% and 125W.Temp CPU70,MB40,SB50,NB60 (MB,SB,NB same and stable as IDLE)
My question: What is the design temp for this cooler?
Not only the temp diff of cooling media (room air temp) but also the difference between them (CPU) matters. Temp diff is the "amplitude" (pressure) of transfer ability between 2 media.
In my case air between heatpipe/convection surface.
Or am I thinking totaly wrong?