Quote:
Originally Posted by matthew9812
On the official website of Antec I found the following dimensions:
48.77cm (H) x 26.16cm (W) x 53.59cm (D)
My case is 42.4cm (H) x 18.2cm (W) x 47.8cm (D) and the side panel can't close properly anymore.
Comparing your case to mine, 26.16 vs 18.2 I can assure you that it will fit in your case.
About your motherboard:
I don't know why it wouldn't be able to fit on that motherboard. You don't have any big/high heatsinks from the chipset so I think it won't be a problem. It looks like any other regular Gigabyte motherboard, it also looks like mine which fits perfectly.
Case: will fit, Motherboard: will most likely also fit.
|
Thank you!
Quote:
Originally Posted by sumo
Hello felipe,
i can agree what Metthew said, there should no problems with you case and your Mainboard. Your Case is big enough to handle the Mugen 2 and you Board has a lot of space. The only typical problem that can happen is that the cooler maybe block one or two memory sockets (only for high Memory),
Google Translate:
Olá Felipe,
Posso concordar que Metthew disse, há que quaisquer problemas com o seu caso e sua Mainboard. Seu processo é grande o suficiente para lidar com o seu Mainboard Mugen 2 e tem um monte de espaço. O único problema típico que pode acontecer é que o bloco refrigerador talvez um ou dois soquetes de memória (só para muita memória),
Cheers Chris
|
No needed to translate for my language, anyway, thank you.
I still do not have these components, but I am thinking, because I would like to use the Mugen 2 in the near future.
Wich orientation the Mugen 2 can be used in an AM3 motherboard?