For those of you who can read Dutch (or if you just want to see some more pictures
)
look here (Highflow.nl Forum).
I have put some points of improvement there as well, but in short:
-I had some problems while installing where the fancontroller didn't recognize all fans at first. Only by connecting a smaller fan could I engage some channels.
-Can't you make the connections larger so I can connect the fans directly to the controller without having to use 70cm of extensioncable?
-The panel is horizontal brushed aluminium, however my case is vertically brushed. It would blend in more if it was vertically brushed as well. However I am not entirely aware of the dominant direction of brushing. (Is that a term? :P)
-If the Semi mode could have a minimum and a maximum setting with a stepless increase in between it would be perfect.
Viewing angle:
horizontal: 140 degrees (70 each side from the middle)
vertical: 45 degrees (30 upwards, 15 downwards from the middle)
Criticism aside, I am very happy with my Kaze Server, I do think however it could be improved, but it is a good evolution of earlier fancontrollers by Scythe.
Especially the small heatsinks will hopefully prevent it from overheating.
At full blast, these stay cool, but at the lowest setting they will get hot, but you can still hold them.