So you consider that pushing air towards the back 140mm will give better results then?
My reasoning for thinking pushing it up makes more sense is due to two factors.
1st the side 230mm fan is pushing air towards the Scythe fan thus its getting fresh air from the outside.
2nd the huge 230mm and the fact that my power supply mounts on the floor not on the top of my case, means the hot air has a direct patch up and out of the case.
When I place the fan on the right side of the mugen2 pushing air towards the back 140mm fan, the side 230mm fan is below the Scythe fan thus not giving it as much fresh air as when the Scythe is at the bottom of the Mugen2.
Then again there is the other problem that there is not a lot of room between the back of my second GPU and the Scythe to get fresh air when its mounted pushing air up.
Several factors here so I will have to test.
I am just waiting for my new low voltage ram to arrive (1600Mhz 7-7-7-24 @1.65v OCZ) to arrive to start testing.
I called the post office and its on its way home as we speak. :-)