about the moving 0.0°c i would say its a defect cable..
now to my Problem.. i did a testrow with some
changes on my 2 Kazemasters
first i found out that the rpm signal goes off if i start another 1-2 fans on that kazemaster, i dont need em all time together
on 1 is a cpufan 92mm Zalman (zalman 9700 led)
on 2 is a 120mm Scythe Slipstream 1900
on 3 is a 120mm somewhat ledfan
---------------
Fan1 Fan2 Fan3
Cpu 120slip 120mm
1100~ off 1100~ (the fan2 goes off after around 3-5 minutes)
i first changed cpu and 120mm slipstream
here the same, fan2 goes off after 3-5 minutes
then i changed the cable, still the same
then i tested on the other Kazemaster but no problems there
i took a look on the back of the kaze then and i think its a production problem, here the pic i marked fan2 who is off
