MSI P35 Neo-F (aka MS-7360):
Compatible
I used the push-pins to mount the Scythe Kama Angle onto the board.
Had the same problems as always: Trying to press the push-pins trough the board using a soft surface below the board. Three pins went well, the forth took me some time... I am really looking forward to the 775 stabilizer kit.
Tiny problem with the board: The P4-connector is below the Kama Angle. So you have to plug in the connector first, then mount the power supply to the case (here: Cooler Master Centurion 5).
The Kama Angle fits into the Centurion 5 without any problems. I always mount the fan as the last part, so you can see the two fans (PSU and case) that will blow the warm air out of the case.
Last but not least: If you have the MSI P35 Neo-F (or another board with the same positions for the RAM): Simply shove the fan a little bit to the left, then you can plug in the RAM modules very easily. It is not mandatory to remove the fan if you want to install new RAM.
Greetings, Martin