08-23-2008, 01:52 PM
|
Junior Member
Join Date: Feb 2008
Posts: 21
|
Ninja2 with a 4 pin CPU fan connector
Nowadays all the motherboards use the 4pin connector for the CPU FAN header and sadly motherboard makers have started to discontinue support for FANs with 3 pin CPU connector to be controlled thru bios using Smart Fan or similar.
Since Ninja2 is meant to be quiet why doesn't the FAN use the 4 pin connector (PWM)?
Even with my board I had to request a BIOS fix for my Ninja's fan to operate thru Smart Fan in bios because it is only a 3 pin CPU fan.
3 pin to 4 pin CPU connector
__________________
Corsair VX-450W, Athlon 5000+ BE@3000MHZ 1.4v /w Scythe Ninja 2, MSI K9a2 Platinum, 2x1GB 800MHz Super Talent 4-4-3-8@2.0v, Sapphire 3850 256MB
|
| |
Last edited by ashrack; 08-25-2008 at 07:15 AM..
|