Hello again!
Molot: Well Asus m2npv-mx should be ok with Zipang. The fan controller might not be able to be controlled by the mobo. You probably want to put the fan permanently on 5V. I think rest should be fine then.
voor: The GA-EX38-DQ6 should be compatible. If you have the space,then use the normal Ninja PLUS Rev. B. Also for the FDB bearing, you can get a 80mm fan from the
Kama Flex Series. As Oli said, the RAM should be fine, unless you have the OCZ Reaper. they are definitely too tall. Yet if the Ninja is not lapping over the memry slots, there won#t be any problems for both Ninja mini and Ninja Plus.
Superczynski: It is difficult to say, because the heatpipe cooler is simply very close to the socket. Ninja Copper should have a tight fit, but since you can turn it, I think that one will fit with higher chances.