Official Scythe Forum - View Single Post

Oli · #**108** (**permalink**) 04-11-2008, 07:26 PM

First of all this MB looks much safer than the M2N32 Sli you also asked for. Nevertheless the RAM sockets are very near to the CPU socket. The fan can be installed above the RAM sockets with Ninja - I had this setup running for months (not this board but fan above RAM sockets). But please note that you cannot use RAM with heatpipes or cooling elements ("overclocking RAM"). Standard RAM modules should be safe.

I cannot guarantee that'll fit but it looks good with the above restrictions.

Bye Oli

#108 (permalink) 04-11-2008, 07:26 PM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 826	First of all this MB looks much safer than the M2N32 Sli you also asked for. Nevertheless the RAM sockets are very near to the CPU socket. The fan can be installed above the RAM sockets with Ninja - I had this setup running for months (not this board but fan above RAM sockets). But please note that you cannot use RAM with heatpipes or cooling elements ("overclocking RAM"). Standard RAM modules should be safe. I cannot guarantee that'll fit but it looks good with the above restrictions. Bye Oli __________________ - All comments relating to mainboard / cooler / case compatibility are based on "best guess". - - Aussagen zur K�hler-Kompatibilit�t basieren auf unverbindlicher, pers�nlicher Einsch�tzung. - C2D E6700@3.33Ghz@1,28V / Mugen 1, Ret Kit & 2x Slip Stream PWM @ 280rpm