Official Scythe Forum - View Single Post

ga740416 · #6 (**permalink**) 03-31-2008, 06:38 PM

I have the same problem with kama connect 2. I have tried 4 of them.
The probem is with the power cable or with the S-video-like output.
I connected the 'kama connect 2' IDE 3.5" interface to HDD and supplied the power from a molex connector from PC and the transfer worked fine. There is no need to connect the kama device to power cable; just turn it on.

The SATA and IDE 2.5" interfaces worked because the power is suplied internally. The IDE 3.5" provides only the data transfer interface.

So, the only solution I see now is to find an independent power supply to connect to HDD.

PS: Sorry for my english...

#6 (permalink) 03-31-2008, 06:38 PM
ga740416 Junior Member Join Date: Mar 2008 Posts: 1	kama connect 2 ide 3.5 problems I have the same problem with kama connect 2. I have tried 4 of them. The probem is with the power cable or with the S-video-like output. I connected the 'kama connect 2' IDE 3.5" interface to HDD and supplied the power from a molex connector from PC and the transfer worked fine. There is no need to connect the kama device to power cable; just turn it on. The SATA and IDE 2.5" interfaces worked because the power is suplied internally. The IDE 3.5" provides only the data transfer interface. So, the only solution I see now is to find an independent power supply to connect to HDD. PS: Sorry for my english...