02-24-2008, 12:21 PM
|
Senior Member
Join Date: Aug 2007
Location: Germany, in the middle of Europe
Posts: 423
|
I pushed and turned the pushpins from above with a long screw driver. That was no problem. (My picture.  )
The Corsair modules seem to be quite high. Perhaps the RAM slot closest to the CPU socket cannot be used. Probably two slots cannot be used. You could put the fan a bit higher. This could be sufficient to clear the RAM slots.
Bye Oliver
__________________
C2D E6700@3.33Ghz@1,28V / Mugen, Ret Kit & 2x Slip Stream @ 550rpm / summer: idle 37 - load 70 / winter: idle 33 - load 64
|
| |
|