USB Foot Switch II

The second version of the USB foot switch for performing keyboard and mouse functions. The mechanical switch have been replaced by an optical version. The frictional noise of the housing has been largely reduced by means of noise-absorbing rubbers. Furthermore, compared to the previous model, a 3 mm shorter stop ensures that the USB Foot Switch II can be operated with little force. The USB foot switches are available with one, two and three buttons, which can be freely assigned with the operating software.

Features

Noise-reduced version

The second version of the footswitches has a 3mm shorter stop and can therefore be operated more easily and with less noise.

USB

Only requires a USB interface. No drivers are required, the footswitch is recognized as a USB HID in the OS. The enclosed software is only required to define the emulated keys. Left and right mouse clicks, double clicks, all keyboard keys and all ctrl / alt shortcuts can be integrated. The configured foot switch can then be used on other PCs without any additional software or settings.

High compatibility

Compatible with the Windows operating systems XP / Vista / 7/8/10. The included setup software supports Windows. However, once the foot switch has been set up in a Windows system, it can also be used under Mac OS and Linux.

Specification

Model Name
USB Foot Switch 2 Single
USB Foot Switch 2 Double
USB Foot Switch 2 Triple
Model Number
USB-1FS-2
USB-2FS-2
USB-3FS-2
Weight
230 g / 7.423 oz. (Single)
570 g / 20.10 oz.(Double)
900 g / 31.75 oz (Triple)
Cable Length
approx. 180 cm / 70.87 in
Dimensions Overall
120 x 67 x 34 mm / 4.72 x 2.64 x 1.34 in (Single)
130 x 210 x 37 mm / 5.11 x 8.26 x 1.46 in (Double)
130 x 360 x 37 mm / 5.11 x14.17x 1.46 in (Triple)
Dimensions Switch
120 x 67 x 34 mm / 4.72 x 2.64 x 1.34 in (all versions)
Cable Length
approx. 180 cm / 70.87 in
Key Stroke
approx. 5 mm / 0.1969 in
Compatible OS
Windows XP/VISTA/7/8/10 Once set up on a Windows OS using the supplied software, USB Foot Switch II can be used on Mac and Linux operating systems.
Please note: The software version 2.30 (see below) is a test version that offers more settings for the behavior of the buttons, but has not yet been fully translated. If you want to use functions such as "holding" the keys, please use this version.