SimplyCool

 

FUMA 2

The Fuma 2 follows the design principle of its predecessor and offers a powerful twin-tower radiator with a completely revised, asymmetrical design. Six high-quality 6 mm heatpipes connect the two heatsinks to the solid copper baseplate. All copper parts were lavishly nickel plated. The asymmetric orientation and a recess on the back of the second cooling-block allow unrestricted use of all memory banks. The Fuma 2 comes with two PWM fans from the popular Kaze Flex series. In addition to a regular model, a new slim version with a frame width of 15 mm is also used. The Fuma 2 uses the principle of the "Dual Fan Reverse Airflow" design, in which the fans rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. To further maximize cooling performance, an additional fan can be mounted. The required mounting brackets are included.

Product-Photos

Fuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU Cooler

Specifications

Model Name:
FUMA 2 CPU Cooler

Model Number:
SCFM-2000

EAN: 4571225057200

Compatibility:
Intel®:
Socket LGA775
Socket LGA1150
Socket LGA1151
Socket LGA1155
Socket LGA1156
Socket LGA1366
Socket LGA2011 (v3)
Socket LGA2066

AMD®:
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket AM4
Socket FM1
Socket FM2
Socket FM2+

Please note that an original backplate with screw mounting is needed for installation on mainboards with AMD sockets. Please check before buying if the backplate is fixed by screws (example)! If the backplate uses plastic-pins, mounting of this cooler is not possible.

Overall Dimensions:
137 x 131 x 154,5 mm  (including fan)

Weight:
1.000 g / 33,8 oz

Accessory:
Installation material for Intel™ and AMD™ Socket, thermal grease, fans, fan clips, installation manual, Y-PWM-cable, screwdriver

Baseplate Material / Heatpipes:
Nickel-plated copper (additional information)


Fan Specifications

Model Name:
Kaze Flex 120 Slim PWM (Fan 1)
Kaze Flex 120 PWM (Fan 2)

Model Number:
SU1215FD12H-CNP
SU1225FD12M-CHP

Dimensions:
120 x 120 x 17 mm
120 x 120 x 27 mm

Noise Level:
2,7 ~ 23,9 dBA
4,0 ~ 24,9 dBA

Air Flow:
8,28 ~ 33,86 CFM - 18,40 ~   75,24 m³/h
16,6 ~ 51,17 CFM - 36,89 ~ 113,71 m³/h

Fan Speed:
300 (±200 rpm) ~ 1.200 rpm (±10%) (PWM-controlled)

Static Pressure:
2,26 ~ 8,83 Pa / 0,23   ~ 0,9  mmH²O
0,75 ~ 10,3 Pa / 0,762 ~ 1,05 mmH²O

Bearing Type:
Sealed Precision FDB

Max. Power Consumption:
2,16 W
1,56 W

Voltage:
12 V

Amperage:
0,18 A
0,13 A

Dimensions

Features

Twin-Tower-Design
The classic twin-tower design of the Fuma 2 is not centered directly above the CPU socket, but offset by inclined heatpipes. This asymmetrical design provides maximum space for the memory banks. Also the cooling fins of the second tower are aligned in such a way that even memory banks on both sides of the CPU socket can be operated without problems, without restricting the effectiveness of the heat sink. Despite the enormous cooling surface of the Fuma 2 remains at a height of 154.5 mm and fits into any standard PC case.

 

Dual Fan Reverse Airflow
The Fuma 2 CPU cooler comes with two fans, a Kaze Flex 120 and a Kaze Flex Slim 120, which rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. Furthermore a third fan can be mounted for extra power. Additional fan brackets are included.

 

Kaze Flex Fans
Both the regular model as well as the Kaze Flex Slim fan use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberized bearing surfaces have a decoupling effect and prevent the transmission of noise and vibrations.

 

H.P.M.S. III (Hyper Precision Mounting System III)
The Fuma 2 CPU cooler uses the proven H.P.M.S III mounting system. A pre-assembled mounting bar with spring-loaded screws ensures balanced pressure distribution. During the installation, the adaptable backplate is securely held to the mainboard by rubberized spacers, making the process considerably easier. The mounting system offers full compatibility with all current sockets including AMD's AM4 and Intel's LGA 2066.

 

 

 

Reviews

Awards